Premier 6300 Stim Plus Digital Tens Machine

Product Code: None

Availability: In Stock

Price: Rs: 8,799.00

Qty:

Tags: Premier 6300 Stim Plus Digital Tens Machine in Pakistan

Description
Custom Tab

Premier 6300 Stim Plus Digital Tens Machine in Pakistan

The Premier Stim Plus TENS/EMS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups. This unit is a combination stimulator of TENS and EMS which can be used for pain relief and muscle stimulation. The device is provided with two controllable output channels, each independent of the other. A pair of electrodes can be connected to each output channel. The intensity level and settings are controlled by press buttons.

MECHANISM

TECHICAL DESCRIPTION

Channel

Dual, isolated between channels

Pulse Amplitude

Adjustable, 0-110 mA peak into 500 ohm load each channel.

Wave Form

Asymmetrical Bi-Phasic Square Pulse

Voltage

0 to 55V (Load: 500 ohm)

Power source

One 9 Volt Battery.

Size

11.8cm(L) x 6 cm(W) x 3.1cm(H)

Weight

157 grams with battery.

Pulse Rate

Adjustable, from 2 to 150 Hz, 1 Hz/step

Pulse Width

Adjustable, from 50 to 300 microseconds, 10 µs/step

On Time

Adjustable, 2~90 seconds , 1 Sec./ step

Off Time

Adjustable, 2~90 seconds , 1 Sec./ step

Ramp Time

Adjustable, 1~8 seconds, 1 Sec./ step, The "On"time will increase and decrease in the setting value.

Mode

Six TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width) and P Three EMS Modes:C(Constant), S (Synchronous), A(Alternate)

Burst Mode

Burst rate: Adjustable, 0.5 ~ 5Hz
Pulse width adjustable, 50~300 µs
Frequency fixed = 100 Hz

Normal Mode

The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.

Modulation Mode

Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable.

S1 Mode

Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.

S2 Mode

Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.

Constant Mode(C)

The pulse rate and pulse width are adjustable. It generates continuous stimulation is delivered .

Synchronous Mode(S)

Output from both channels occurs synchronously. The "ON" time includes "Ramp Up" and "Ramp Down" time. Therefore, the setting of ON Time should be no less than two times of the "Ramp" time in this mode.

Alternate Mode(A)

The stimulation of the CH2 will occur after Mode(A) the 1st contraction of CH1 is completed. In this mode, the setting of ON Time should be no less than two times of the "Ramp" time. The OFF Time should be equal to or greater than the ON Time.
ON TIME ≥Ramp up + Ramp down
OFF TIME ≥IN TIME

Mode P

The pre-set parameters of the 9 programs are as given below:

Program	Mode	Pulse Rate	Pulse Width	Timer
P1	Constant	80Hz	180µs	Continue
P2	Burst	100Hz (Burst Rate:2Hz)	180µs	Continue
P3	-70% P.W.Modulation	80Hz	50µs-180µs	Continue
P4	Mixed Frequency	15Hz in 3 Sec /2Hz in 3 Sec	180µs	Continue
P5	Mixed Frequency	80Hz in 3 Sec / 2Hz in 3 Sec	180µs	Continue
P6	Constant	10Hz	180µs	Continue
P7	Constant	80Hz	60µs	Continue
P8	Constant	80Hz	180µs	30 Minutes
P9	Burst	100Hz(Burst Rate:2Hz)	180µs	30 Minutes

Timer

Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.

Patient
Compliance Meter

This unit can store 60 sets of operation records. Total recorded time is 999 hours.

Low Battery Indicator

A low battery indicator will show up when the battery is low.

Operating Condition

Temperature:0°-40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa

Remark

There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.

You are looking now latest Premier 6300 Stim Plus Digital Tens Machine price in pakistan market 2015 including in all major cities of Pakistan,Premier 6300 Stim Plus Digital Tens Machine Price in Karachi, Premier 6300 Stim Plus Digital Tens Machine price in Lahore ,Premier 6300 Stim Plus Digital Tens Machine in Islamabad, Sialkot, Faisalabad, Peshawar, Quetta, Multan, Rawalpindi and many more cities.

Sapiente rerum magni voluptates accusantium sequi molestias deleniti aliquid facilis commodi aut. Ea ab facere voluptatem cum beatae vero dolorem doloribus itaque culpa. Molestiae, optio, libero inventore ducimus natus incidunt qui dolor adipisci tempore tempora quo minima distinctio eligendi laborum ex quaerat eos! Unde suscipit porro est amet quis nostrum enim. Asperiores, ad, hic, culpa, rerum delectus similique minus facilis reprehenderit quisquam debitis dolores suscipit!

Qui laboriosam maiores ad. Enim, autem, beatae, sapiente minima non atque maiores maxime natus corporis possimus reprehenderit id blanditiis sequi repudiandae saepe reiciendis consequatur mollitia aspernatur cum!